Delta AX-3 Series, Operation Manual

Page: 38 / 370

A X - 3 S e r i e s O p e r a t i o n M a n u a l
3 - 6
_3

Installing the AX-3 Series PLC on DIN rail
Pull out the fixing clips at the rear of the AX-3 Series PLC. Then edge in the horizontal slots which are at the rear of
the AX-3 Series PLC on the DIN rail. And then push and lock the fixing clips to have the AX-3 Series PLC securely
installed in the control cabinet. (The image below is for illustration purposes only; refer to AS500E Series Motion
Controller Operation Manual for more information.
)
OUT OU T

The installation inside the control cabinet (The image below is for illustration purposes only; refer to AS500E
Series Motion Controller Operation Manual for more information.
)