Delta AX-3 Series, Operation Manual

Page: 37 / 370

C h a p t e r 3 I n s t a l l i n g H a r d wa r e a n d G e t t i n g S t a r t e d
3 - 5
3_
3.1.3 Installing the AX-3 Series PLC in the Control Cabinet

Environmental Temperature Requirement for the Control Cabinet

The ambient temperature of the control cabinet should be -20 ~ 55°C and the humidity 5 ~ 95%.

DO NOT install the control cabinet near flammable material or high-temperature equipment.

Keep enough space for air ventilation.

Install fans or air conditioning system if the environment temperature exceeds 55°C.

The equipment is for indoor use only.

Install the control cabinet around 1.0m~2.0m in height for easier installation and operation.

Keep the installation away from the high-voltage equipment or power equipment.

Cut off the power supply of the control cabinet before installation.

Actions for Anti-interference

Do not install the AX-3 Series PLC in the control cabinet with high-voltage equipment.

Keep at least 200mm away from the power wire.

The control cabinet should be grounded.

Use the AX-3 Series PLC according to the instructions on the manual. If operating the AX-3 Series PLC in a
manner not specified by the manufacturer, it may weaken the protection provided.

Dimension Requirement for the Control Cabinet
The AX-3 Series PLC has to be installed in an enclosure. In
order to ensure that the AX-3 Series PLC radiates heat
normally, the space between the AX-3 Series PLC and the
enclosure should be larger than 50 millimeters. (D > 50mm)
D D
D
D
M otion Controller