Delphin ProfiMessage, Hardware Manual

Page: 171 / 322

Profi Message
4.8.2.2 CAN bus channel
A CAN bus input channel is identified by and a CAN bus output signal by .
CAN-bus channels are available only when a CAN connection and CAN protocol
have been configured. Select Create channel
→
CAN bus inputor CAN bus output
in the CAN protocol context menu ( , CAN RAW protocol), to create channels.
Double-click a CAN bus channel entry or select Properties from the context menu to
display the configuration dialogue. The data to be entered depends on the type sig-
nal that is to be sent to or received from the CAN-bus user. (Refer to
Using channel
as an output ). Therefore, obtain information on the format and settings of the sig-
nal before entering data here.
Refer also to
Settings for all dialogues .
171
Delphin Technology AG
Dezember 2015
Profi Message Manual