Delphin ProfiMessage, Hardware Manual

Page: 203 / 322

Profi Message
l
Timeout
Sets the maximum permissible time that may elapse between a query ( poll
string ) and its response, or between two sequential responses (without poll
string) before an error status is given. In the event of an error, a "wire-
break" status is displayed (refer also to the table in
Status monitoring ).
l
Pause
Sets the waiting time between two queries using a poll string. The poll string
is resent once this time has elapsed.
Polled
l
Poll string
The string entered here will be sent to the user according to the time frame
defined using
Pause . This is required when a user sends a response (a
value) only after he has been “prompted". Leave the field empty if the user
doesn't require prompting to send.
Enter the string as text. ASCII characters that cannot be entered directly,
e.g. carriage return (CR) or line feed (LF), can be entered using % and the
ASCII value in hexadecimal format: Enter CR as %0D and LF as %0A.
l
Filter
If the user sends multiple responses (messages or comments), you can use
a filter to retrieve the responses you require in this channel. Enter the mes-
sage's beginning, e.g.
$GPGGA .
l
Delimiter
If the filtered message contains multiple elements, use this delimiter to
determine how these elements are separated and which element (
n’th ele-
ment ) is to be used for this channel.
Decoding
l
Offset
Truncates the first character of the message as set under Polled . This means
the message is evaluated from this offset. You can set the offset from the
absolute beginning of the message (default) or relative to the first character
with the
Filter ( Offset relative to filter ).
l
Maximum length
Evaluates the message only up to the character given here. All other char-
acters are ignored.
4.8.4 LAN
This window enables network data to be input or amended. Changes to settings
are only adopted after clicking
Save .
203
Delphin Technology AG
Dezember 2015
Profi Message Manual