Delphin ProfiMessage, Hardware Manual

Page: 221 / 322

Profi Message
Ethernet stand-
ards
10/100Base-T (half and full duplex), auto-negotiation
Protocols
TCP/IP, UDP, ICMP, HTTP, SMTP, NTP Modbus TCP Cli-
ent/Server
Connector RJ45 (8-pin connector TP)
Galvanic isolation 1.5 kVeff
USB interface
Interface type USB master
Transmission speed USB 1.0 Full Speed (USB 1.1 compatible)
Power for external devices 5 V max. 500 mA (High Power)
Connector USB connector type A
External bus (Ext. BUS)
Interface type CAN 2.0B, ISO 11898-1, ISO 11898-2
Baud rate max. 1 Mbaud
Connector LP-3-pin terminal block (e.g. Wieland type 8113B/3VL)
Galvanic isolation 1 kV
COM1:
Interface
type
RS-485 interface
Baud rate max. 12 Mbaud
Connector 9-pin D-SUB connector, pin assignment according to IEC 61158
Galvanic
isolation
1 kV (no isolation to CAN)
Features
Built-in PROFIBUS controller hardware 1) DP V1 slave, redundant
according to PNO document No. 2212 V1.2
1) The identification number for Profi Message , as allocated by the German
PROFIBUS User Organization (PNO) , is 0x09B8. Further information can be found
in the GSD file. Refer to PROFIBUS GSD file and PROFIBUS protocol.
CAN (CAN bus)
221
Delphin Technology AG
Dezember 2015
Profi Message Manual