Delphin ProfiMessage, Hardware Manual

Page: 77 / 322

Profi Message
HTTP is required for the Web interface (for example firmware update), but can
however be switched off when not required.
SSH , Telnet and FTP are required only if you wish to access a device via these ser-
vices.
SFMP (Search For Message Protocol) is used to find devices (Connections
→
Find
Delphin device on LAN).
PiMP (PoND interchange Message Protocol) is permanently required by the DataSer-
vice and cannot therefore be deactivated.
XiMP (XML interchange Message Protocol) transfers data in the same way as the
DataService, except in XML format.
WiMP (Web interchange Message Protocol) is required for example for channel rep-
resentation ( Live channel values ) in your Internet browser.
PTerm is used only in debug mode for Telnet transfers and is therefore not activ-
ated by default.
More topics
4.6 Configuring I/O module channels
I/O module channels denote the channels of the I/O modules. The configuration for
software channels, interfaces and device memory is described in separate sec-
tions.
Refer also to Overview , Settings for all dialogues , Galvanic isolation, and Tech-
nical specifications
4.6.1
I/O module
This section describes configurations at the I/O module level and how to delete a
module entry .
An I/O module appears in the Channels tab as a symbol. The I/O modules are
available in the hardware view below the "Ext BUS
→
DCP" entry. The user-
defined view lists all the I/O modules directly below the device ( ) – provided the
user has not already moved the modules or channels.
Double-click an I/O module or select Properties from the context menu to display
the configuration dialogue. Use the dialogue to change the module name or set the
module number (bus address) in the
Main settings tab.
77
Delphin Technology AG
Dezember 2015
Profi Message Manual