Delphin ProfiMessage, Hardware Manual

Page: 79 / 322

Profi Message
Give each connected module a unique number between 1 and 99. Numbers that
have already been allocated are marked with the symbol. When a number has
been allocated, the module symbol is displayed next to the number.
Module settings (for I/O modules DIOT and ADFT only)
These modules provide the option of using the counter inputs either as pulse coun-
ters or frequency measurements. For frequency measurements, set the period
over which incoming impulses are totalled to enable the frequency to be determ-
ined. Low frequencies require a correspondingly longer time to acquire multiple
vibrations, but measurement is slow for long time periods. Measurement is more
dynamic for small times, but fewer vibrations are detected and measurement data
fluctuates more strongly. Ensure the gate time is small enough at higher fre-
quencies because the maximum number of pulses that can be counted is 65535.
delete module entries
Modules can also be displayed that currently have no connection, but have been
previously connected or configured. As long as they have not been deleted, they
appear with the symbols or before the module symbol in red font. The
configuration is retained and reloaded as soon as the module is reconnected.
Deleting a module entry permanently deletes the entire
module configuration, including all hardware channels.
Therefore, prior to deleting, back up the current con-
figuration. Refer to
save/ load configuration
.
Delete the entire module entry when the module configuration is no longer
required. Click
Delete channel along with subchannels/links from the module's
context menu.
79
Delphin Technology AG
Dezember 2015
Profi Message Manual