Delphin ProfiMessage, Hardware Manual

Page: 92 / 322

Profi Message
The example means: 0 pulses correspond to 0 kHz, 5000 pulses correspond (with
a gate time of 100 ms) 50 kHz.
Scaling
Enter two points from the sensor's characteristic curve, if possible, the lower and
upper vertexes. For a linear characteristic, measurement values are then con-
verted into the unit of measurement (scaling) from the sensor. For non-linear char-
acteristics, use
Sensor compensation . Refer to tab Sensor compensation . The
specified range (0 to 3600 degrees in the upper example, i.e. 10 rotations; in the
lower example 0 to 50 kHz) is the default for the display area in Profisignal graph-
ics. The channel receives the status "scale range overrun" for "scale range under-
run" when not within the range. Channel status values are available in
status
monitoring.
92
Delphin Technology AG
Dezember 2015
Profi Message Manual