Printing quality problems
Condition
Suggested solutions
Curl
If the printed paper is curled or paper does not feed into the machine:
• Turn the stack of paper over in the tray. Also try rotating the paper 180° in the tray.
• Change the printer’s paper option and try again. Go to
Printing Preferences
, click the
Paper
tab, and set type to
Thin
(see
"Opening printing preferences" on page 51).
• An unknown image
repetitively appears on a few
sheets
• Loose toner
• Light print or contamination
occurs
Your machine is probably being used at an altitude of 1,000 m (3,281 ft) or above.The high altitude may affect the print quality, such
as loose toner or light imaging. Change the altitude setting for your machine (see "Altitude adjustment" on page 193).
6. Troubleshooting
260
Summary of Contents for B1265DFW
