Wireless network setup
Access point via USB cable in Windows
•
Items to prepare
-
Access point
-
Network-connected computer
-
Software CD that was provided with your machine
-
-
The machine installed with a wireless network interface
USB cable
1
2
Check whether the USB cable is connected to the machine.
Turn on your computer, access point, and machine.
If the “
Found New Hardware Wizard
” appears during the installation
procedure, click
Cancel
to close the window.
Insert the supplied software CD into your CD/DVD drive.
3
The software CD should automatically run and an installation window
will appear.
If the installation window does not appear, click
Start
>
All programs
>
Accessories
>
Run
.
X:\
Setup.exe
replacing “X” with the letter, which represents your CD/
DVD drive and click
OK
.
•
For Windows 8,
If the installation window does not appear, from
Charms
, select
Search
>
Apps
and search for
Run
. Type in X:\Setup.exe, replacing
“X” with the letter that represents your CD/DVD drive and click
OK
.
If “
Tap to choose what happens with this disc
.” pop-up window
appears, click the window and select
Run Setup.exe
.
2. Using a Network-Connected Machine
159
Summary of Contents for B1265DFW
