Basic faxing
Enter the number of the first receiving fax machine and press
OK
.
5
You can press speed dial numbers or select a group dial number using
the (
Address book
) button (see Advanced Guide).
Enter the second fax number and press
OK
.
6
The display asks you to enter another fax number to send the document.
To enter more fax numbers, press
OK
when
Yes
appears and repeat
7
steps 5 and 6. You can add up to 10 destinations.
Once you have entered a group dial number, you cannot enter another
group dial number.
When you have finished entering fax numbers, select
No
at the
Another
8
No.?
prompt and press
OK
.
The machine begins sending the fax to the numbers you entered in the
order in which you entered them.
Receiving a fax
Your machine is preset Fax mode at the factory. When you receive a fax, the
machine answers the call on a specified number of rings and automatically
receives the fax.
21
Adjusting the document settings
Before starting a fax, change the following settings according to your original’s
status to get the best quality.
It may be necessary to press
OK
to navigate to lower-level menus.
Resolution
The default document settings produce good results when using typical text-
based originals. However, if you send originals that are of poor quality, or
contain photographs, you can adjust the resolution to produce a higher quality
fax.
Select (fax)
> (
Menu
) >
Fax Feature
>
Resolution
on the control
1
panel.
Select the option you want and press
OK
.
2
•
Standard
: Originals with normal sized characters.
•
Fine
: Originals containing small characters or thin lines or originals
printed using a dot-matrix printer.
•
Super Fine
: Originals containing extremely fine detail.
Super Fine
mode is enabled only if the machine with which you are
communicating also supports the Super Fine resolution.
2. Menu overview and basic setup
62
Summary of Contents for B1265DFW
