Dell 5100cn, User Manual

Page: 250 / 298

Expands horizontal tabs to n columns (space). The default is 8.
-s size
Specifies the font size as point size. The default is 10.
-E
This function turns on the image enhancement function. In some cases, this option will be ignored.
-f font
Sets the font.
NOTE: The available fonts are limited to the font in the printer. For more information, see " Understanding Fonts ."
-Nc= copies
Specifies the number of output copies (the value of copies must be a positive integer).
-cl
Specifies that printing be collated. If the copies option is not specified, this option will be ignored.
-ps
The input file will be processed as the PostScript file. If the file does not begin with
%!
,
%!
will be output to the
beginning line. If a file contains
%!
, it will be processed in the same way as dellpsif.
-mg= up:bottom:right:left
Specifies the margin of a page in inches. The upper margin, bottom margin, right margin, and left margin are
positive real numbers (up to two decimal points). The default is 0.
-mg=0:0:0:3
Sets the left margin to 3 inches.
-mg=3:3:0:5
Sets the upper margin to 3 inches; bottom margin, 3 inches; and left margin, 5 inches. If the margin is 0, it
can be omitted.
-mg=:::3
Sets the left margin to 3 inches.
-Hd= position : format : page
Specifies the position that the user information of the header or footer is output at.
position specifies output position. But this option is available only for converting text files.
ul
Output on the upper left corner of the paper.
ur
Output on the upper right corner of the paper.
dl
Output on the lower left corner of the paper.
dr
Output on the lower right corner of the paper.
format specifies the contents and the order to output. This option is omissible.
If this option is omitted,
uh
is specified as the default value.
u
User name
h