Dell 5100cn, User Manual

Page: 216 / 298

the highest density are those next to the straightest lines. When 0 is the value nearest the straightest line, you do
not need to adjust the color registration. When the value is not 0, follow the procedure outlined in " Entering
Values ".
Entering Values
Using the operator panel, enter the values that you found in the color registration chart to make adjustments.
1. Press Menu .
2. Press until
Configure
appears, and then press or .
3. Press until
Maintenance
appears, and then press or .
4. Press until
Color Reg Adj
appears, and then press or .
5. Press until
Enter Number
appears, and then press or .
The cursor is located at the first digit of the
Enter Number
.
6. Press until you reach the value (for example,
+3
) displayed on the chart.
7. Press once and move the cursor to the next value.
8. Repeat steps 6 and 7 to enter all of the digits of the
Enter Number
, and then press .
9. Press until
Correction Chart
appears, and then press .
The color registration chart is printed with the new values.
10. Color registration adjustment is complete when the straightest Y (yellow), M (magenta), and C (cyan) lines are
next to the 0 line.
CAUTION: After printing the color registration chart, do not turn off the printer until the printer motor
has stopped running.
NOTE: If 0 is not next to the straightest lines, determine the values and adjust the printer again.