Dell 5100cn User Manual Download Page 228

Page: 228 / 298

Connector

144PIN SO-DIMM Non-ECC

DIMM Size

128 MB, 256 MB, 512 MB

Speed

PC133, CL=2 or 3

Page-description Language (PDL)/Emulation, Operating

System, and Interface

PDL/Emulations PostScript 3, PCL 6, PCL5e

OSes

Windows 95/98/Me/2000/NT4.0/XP, Windows Server 2003, UNIX (Solaris 9, HP-UX 11-

), Linux (Red

Hat 8/9, Red Hat Enterprise Linux AS 2.1, SuSE 8.2/9), Mac OS 9/Mac OS X 10.2.8/10.3.X

Interfaces

Standard local:
Standard network:

USB, IEEE 1284
10/100Base-Tx Ethernet

MIB Compatibility

A Management Information Base (MIB) is a database containing information about network devices (such as adapters,

bridges, routers, or computers). This information helps network administrators manage the network (analyze

performance, traffic, errors, and so on). The 5100cn complies with standard industry MIB specifications, allowing the

printer to be recognized and managed by various printer and network management software systems, such as IBM Tivoli,

Hewlett-Packard OpenView, CA Unicenter, Hewlett-Packard Web JetAdmin, and so on.

Cartridge and Printer Life

Toner cartridge yield at approximately 5% coverage 9,000 pages (Black)

8,000 pages (Yellow/Magenta/Cyan)

Imaging drum

35,000 pages equivalent

Duty cycle (maximum)

30,000 pages/month (color)
90,000 pages/month (black and white)

Transfer roller

35,000 pages

Fuser

100,000 pages

Separator roller

100,000 pages

Separator roller (multipurpose feeder)

45,000 pages

Printer life

300,000 pages or 5 years, whichever comes first

Environmental

Operation

Temperature

5°C to 32°C

Relative humidity 15% RH to 85% RH (no-condensation)

Summary of Contents for 5100cn











































































































































































































































































































Search results

Summary of Contents for 5100cn

Reviews:

Related manuals for 5100cn

Brands by name

Popular brands

Dell 5100cn, User Manual

Search results

Summary of Contents for 5100cn

Reviews:

Related manuals for 5100cn

Brands by name

Popular brands