Dell 5100cn, User Manual

Page: 169 / 298

19. Now press MENU to get back to
Ready to Print
20. Now insert the Letter-sized stack of paper into the
Tray 2
.
21. On the screen
Tray 2/Letter
will appear. (ONLY ON 3x00cn)
22. Press SELECT to confirm this. (ONLY ON 3x00cn)
23. Now on the screen
Tray 2/Plain 1
will appear.
24. Press SELECT to confirm this.
25. We now have all the hardware settings on the printer correct
Now, all software settings screen shots are from WORD, this was done in Word. However if in any application, you go File
® Print and then click the Properties button, you will get this same driver properties window.
26. Open up Word and create a new document.
27. Go to File ® Print .
28. Select the
Dell Color Laser Printer
from the printers list
29. Click the Properties button to the right.
30. This brings up Driver Properties.
31. Click on the
Paper Tray
Tab.
32. Change the Paper Source to
Tray 2
.
33. Click the
Paper
Tab.
34. Select in
paper size
,
Letter
.
35. Select for
Output Size
,
Same as Paper Size
.
36. Click OK .
37. Click Close .
38. Now the printer driver is setup correctly.
39. Now go to File ® Page Setup .
40. Click the
Paper
Tab.
41. Change Paper Size to Legal.
42. Change the Paper source settings BOTH to "DEFAULT TRAY AS PER PRINTER".
43. Click OK .
44. Type in some gibberish in the body of the document and click Print!
Setup printing Transparency from Multipurpose Feeder
1. On the printer operator panel press MENU .
2. Press to get to
Tray Settings
.
3. Press to select
Tray Settings
.
4. Press to get to
Paper Size
. (ONLY ON 3x00cn)
5. Press to select
Paper Size
. (ONLY ON 3x00cn)
6. Press to get to
MPF
. (ONLY ON 3x00cn)