Dell 5100cn User Manual Download Page 210

Page: 210 / 298

CAUTION:

Do not touch inside the printer with your hands. Some parts may be hot. Allow time for the

printer to cool before attempting to remove parts in this area.

4. Gently wipe the automatic density control (CTD) sensor window with a clean dry cloth or cotton swab.

NOTE:

Do not allow anything hard to come in contact with the automatic density control (CTD) sensor window. Do

not use excessive force to clean the window.

5. Replace the transfer roller. Grip the tabs as shown.

6. Align the arrow marks on the transfer roller to the marks on the printer, and gently push the roller into the printer.

Summary of Contents for 5100cn











































































































































































































































































































Search results

Summary of Contents for 5100cn

Reviews:

Related manuals for 5100cn

Brands by name

Popular brands

Dell 5100cn, User Manual

Search results

Summary of Contents for 5100cn

Reviews:

Related manuals for 5100cn

Brands by name

Popular brands