Dell 5100cn User Manual Download Page 2

Page: 2 / 298

(standard 500-sheet tray, optional 500-sheet tray

module, and optional 1000-sheet tray module).

3 Standard 500-sheet tray

4 Multipurpose feeder

5 Front latch

6 Printer

7 Side button

8 Front cover

NOTE:

The front cover opens by pushing the front

latch up.

9 Outer Front Cover

NOTE:

The outer front cover opens by pushing the

side button.

To order replacement toner cartridges or supplies from Dell:

1. Double-click the icon on your desktop.

2. Visit Dell's website, or order Dell printer supplies by phone.

www.dell.com/supplies

For best service, have your Dell printer Service Tag available.

For help locating your Service Tag number, see "

Express Service Code and Service Tag number

Notes, Notices, and Cautions

NOTE:

A NOTE indicates important information that helps you make better use of your printer.

NOTICE:

A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the

problem.

CAUTION:

A CAUTION indicates a potential for property damage, personal injury, or death.

Information in this document is subject to change without notice.

Summary of Contents for 5100cn











































































































































































































































































































Search results

Summary of Contents for 5100cn

Reviews:

Related manuals for 5100cn

Brands by name

Popular brands

Dell 5100cn, User Manual

Search results

Summary of Contents for 5100cn

Reviews:

Related manuals for 5100cn

Brands by name

Popular brands