Dell 5100cn, User Manual

Page: 29 / 298

are not valid for the first three-digits.
DNS DNS Mode Select the check box to get the DNS server address automatically from the DHCP
server.
DNS Server ADDR Sets the DNS server address.
WINS*
1
WINS Mode Select the check box to get the WINS server address automatically from the DHCP
server.
WINS Primary
Server
Sets WINS server address in the nnn.nnn.nnn.nnn format. Each section of
nnn.nnn.nnn.nnn is a value between 0 and 254. Note that values 127 and 224 to 254
are not valid for the first three-digits.
WINS Secondary
Server
Sets a back up WINS server address in the nnn.nnn.nnn.nnn format. Each section of
nnn.nnn.nnn.nnn is a value between 0 and 254. Note that values 127 and 224 to 254
are not valid for the first three-digits.
LPD Connection Time-
Out
Sets the connection timeout period from 1 to 1000 seconds.
IP Filter To set the IP Filter settings, click IP Filter . The " IP Filter " page is displayed.
Port9100 Port Number Sets the port number from 9000 to 9999.
Connection Time-
Out
Sets the connection timeout period between 1 and 1000 seconds.
IP Filter To set the IP Filter settings, click IP Filter . The " IP Filter " page is displayed.
IPP*
1
Printer URI Displays the printer URI.
Connection Time-
Out
Sets the connection timeout period from 1 to 1000 seconds.
Port Number Displays the port number for receiving requests from the client.
Maximum
Sessions
Displays the maximum number of connections received simultaneously by the client.
HTTP Port Number Sets the port number to 80 and 9000 to 9999.
Simultaneous
Connections
Displays the maximum number of connections received simultaneously by the client.
Connection Time-
Out
Sets the connection timeout period from 1 to 255 seconds.
FTP Password Sets whether to enable or disable the password. And also specifies the password
value up to seven characters.
Connection Time-
Out
Sets the connection timeout period from 1 to 1000 seconds.
*1 An optional multi protocol card is required to use.
NetWare
Purpose:
To configure detailed settings for IPX/SPX and NetWare.
Values:
IPX/SPX Frame
Type
Auto Specifies the active frame type automatically.
Ethernet
II
Selects Ethernet II frame type.