Dell 5100cn User Manual Download Page 90

Page: 90 / 298

Operator Panel

Using the Operator Panel Buttons

Printing a Panel Settings Page

Using the Operator Panel Buttons

The printer operator panel has a 2-line by 16-character liquid crystal display (LCD), seven buttons, and two indicators

that flash when the printer is ready to print, and when a error occurs.

1. LCD display

2. Ready indicator

Displays green when the printer is ready. Blinks when data is being received.

buttons

In the Menu mode, displays menus or items in order.

4. Menu button

Toggles between the Menu mode and the Print mode.

buttons

In the Menu mode, selects different submenus. Also selects setting values.

6. Error indicator

Displays red when an error has occurred. Blinks when an irrecoverable error has occurred.

7. Cancel button

In the Menu mode, exits to the Print mode.

Cancels current print job.

button

In the Menu mode, selects the currently displayed menu or item.

In the Print mode, outputs data in the printer.

Printing a Panel Settings Page

The Panel Settings page shows current settings for the operator panel menus.

1. Press

Menu

Summary of Contents for 5100cn











































































































































































































































































































Search results

Summary of Contents for 5100cn

Reviews:

Related manuals for 5100cn

Brands by name

Popular brands

Dell 5100cn, User Manual

Search results

Summary of Contents for 5100cn

Reviews:

Related manuals for 5100cn

Brands by name

Popular brands