![background image](http://html1.mh-extra.com/html/daum-electronic/8008-trs/8008-trs_user-manual_514128092.webp)
M 13
ergo bike
X
Y
Z
Z1
Y1
X1
360mm
12a
14
15
12d
12
12d
12e
S
190
360
13
Mounting the saddle column and adjusting seat height
Tool needed:
14 mm Wrench
Mounting the saddle, adjusting its angle and horizontal position
Insert the saddle column (12) into the support tube and bring it to
the required position
.
Install the saddle (13) on the dowel pin of the saddle carriage on the saddle holder (12e) and set
the saddle angle by tilting it, and then fasten it by tightening the nuts on the left and right side
(with the M14 wrench).
Saddle column
12
Adjusting range = 360 mm / 21 stop positions
Bring the saddle to the required horizontal position with the sliding rail (12e)
and fasten it with the button (12d).
Saddle adjustment
Mounting and Adjusting the Saddle
6.
7.
6.
1
6.
2
7.
1
7.
2
7.
3
6.
3
6.
4
Release the toggle button (12a) and then push or pull the saddle
column carefully
until the toggle button (12a) audibly engages in
the corresponding hole
(21 stop holes over 360mm)
of the saddle
column (12). The locking is visually indicated by the red plunger
button (12b) plunging into the toggle button (12a)! The red plunger
button (12b) must not protrude! This indicates that the lock pin of
the toggle button (12a) is not engaged in the corresponding hole of
the saddle column!
Retighten the toggle button (12a) by a few turns to fasten it after
the red plunger button (12b) locks in position.
Unscrew the toggle button (12a) by about 1 to 2 revolutions, and pull
the spring loaded plastic button
The position of the saddle is very important to ensure a correct
seating position and body posture during the training with the
ergometer bike. The saddle of the
. The height difference between X1 - Z1
is of 360 mm. The horizontal shift range (80 mm) is determined
based on the 12.5 tilt of the saddle column and the adjustment
range (S = 110 mm) of the sliding rail. This gives a maximal
adjustment range of 190 mm globally from the vertical centre
line of the pedals (X - Y).
ergo_bike 8008 TRS
can take
many various position with its height adjustable saddle column (12),
and to its sliding rail (12e)
Saddle
column 12
the red safety
button (12b)
must not
protrude
Assembly
Summary of Contents for 8008 TRS
Page 1: ...8008 TRS ...