ergo bike
M 15
Frame Geometry / Fine Tuning
Fine Tuning
An almost horizontal chest posture is recommended and taken by racing bikers. The legs should
be slightly bend at the pedal lowest (bottom) position. At the horizontal crank position, the kneecap
of the forward pointing foot should stand vertically above the pedal axle.
Training with the
ergo_bike 8008 TRS
is often intended to maintain and improve the physical
condition achieved using a road or a racing bike. To do this, it is required to assume a sitting
posture on the
ergo_bike
, that is as much as possible, identical to that on the racing or road bike.
Therefore, you should measure the saddle height and tilt angle, the distance between the saddle
and the pedal axle as well as the distance between the pedal axle and the handlebars on the road
training bike and reproduce them exactly on the
ergo_bike 8008 TRS
.
9.
The height and tilt angle of the handle column should be adjusted reasonably. Never
set the handle to extreme height or extremely forward positions, and never stand
and bend forward during training! The
ergo_bike
could then lose its stability and
tip over! (Danger of falling and of injuries)
Assembly
Summary of Contents for 8008 TRS
Page 1: ...8008 TRS ...
