![background image](http://html1.mh-extra.com/html/daum-electronic/8008-trs/8008-trs_user-manual_514128006.webp)
2
)
)
)
SLP
watt
2
Power cord
Upon turning on the power switch (On/Off),
the six display windows of the dashboard
will display all the symbols and number
segments for about eight seconds
. This is
a self test run by the computer on the entire system.
The
ergo_bike
switches automatically to
stand by
mode if it is left switched
on and
unused for about two hours
. This is signaled by three beep sounds and ten times blinking
of all the windows, and by the display of
“SLP”
in
window number 2
. All other windows
are blanked. This mode is terminated by pressing
control button number 6
.
The graphic display (window no. 6) provides for more
functional and visual convenience. Displaying training
diagrams, user guidance and hints are functions that
can only be displayed on a graphic display.
Window no. 6
LCD Graphic Display
See page L1 for
explanation about
the display
The dashboard of the
“8008 TRSi”
shows
a
Graphic LCD
in its center (see page 4)
. You will find
a special description of this equipment part and
its operation in appendix L
(LCD Grafic Display).
General information
Setting up
Switching On / Off
Please read the
Notes on Safety
(page 19)
before switching the
ergo_bike
on, and follow
the
installation and assembly instructions
(pages M1 - M15).
The
On/Off switch (power switch)
is located
at the back in a rectangular plastic frame on
the rear perforated plate cover.
On / Off
The
ergo_bike
should be switched off by mean of the
On/Off switch
or by pulling the power cord
plug
from the power outlet.
(This does not apply for the values of the “guest” user.)
Always press the Reset key before switching the
device off in order to save the distance covered
in kilometers.
“Stand-By mode”
( SLP )
Display-
window
Window no. 2
Please note:
The value of the daily kilometer counter (
the wide arrow pointing to Distance
) will
always be added to the total kilometer counter (
the arrow pointing to User/Km Total
),
1. if the
ergo_bike
goes in
Stand By
mode
( SLP-Mode ).
2. or if the
Reset key
is pressed,
or when
3. another person starts a session and
another user identification number
is selected.
Summary of Contents for 8008 TRS
Page 1: ...8008 TRS ...