![background image](http://html1.mh-extra.com/html/daum-electronic/8008-trs/8008-trs_user-manual_514128017.webp)
0
watt
)
)
)
)
)
)
13
LCD Graphic Display
(see appendix L)
Window no. 4
Window no. 5
Window no. 1
Window no. 2
Window no. 3
Window no. 6
Manual setting “0”
When the
ergo_bike
is switched on (
using
the power switch
), or when the
“SLP” state
(sleep mode) is canceled using
control
button No. 6
, it goes into ready state.
You can directly
start training
without
the need to do any particular setting!
Window no. 2
Window no. 3
Window no. 4
Window no. 5
Window no. 6
the actual theoretical velocity (
km/h
)
the actual load setting (in
Watt
)
and the
Relax levels
the elapsed
time
since the beginning of the training.
RPM
the actual speed of the pedals in revolutions per min.
The following symbols/numbers in
display
window no. 1
mean that the
ergo_bike
is set
in
manual mode
for the indicated user number,
and without the entry of any personal alarm values:
This symbol means start
operating / turning the
pedals.
Basic set up
Display windows
Heart pulse rate
Window no. 1
(this value is only displayed if the pulse sensor
Values displayed in the dashboard windows during a training session:
When you start moving the pedals
display windows no. 2,
4
and
5 show the actual training values
.
The smallest load value for a training with the
ergo_bike
is 25 Watts.
You can increase or decrease the load in five Watts increments
by turning the
control button no. 6
.
(ear clip) or the Cardio Sensor chest band is connected and functional)
The pulse frequency will be displayed in window no. 1 when the pulse sensor (ear clip),
or the Cardio Sensor chest band, is connected and functional or when both hands are laid
on the hand pulse sensors on the handle.
Window no. 1
Symbols
graphical representation of the training session
and operating menus
The Dashboard
Summary of Contents for 8008 TRS
Page 1: ...8008 TRS ...