![background image](http://html1.mh-extra.com/html/daum-electronic/8008-trs/8008-trs_user-manual_514128093.webp)
2b
2a
M 14
Adjusting the Position and Height of the Handle
Adjusting handle height
2.
1.
Loosen the
toggle button
2b
on the handle column
by a few turns, until it you can move the handle
column up or down.
Unscrew the
tensing screw
2a
on the side of
the handle column by a few turns.
3.
4.
Then shift the handlebars up or down to bring it to
the required position.
5.
.Tighten the
toggle button
2b;
take care to engage
the screw into one of the stop holes. Then you can
tighten the toggle button firmly.
Tighten the
tensing screw
2a
firmly.
Adjusting the handle column
Handle column at
the lowest position
Handle column at
the highest position
The position of the handle is very important to ensure a correct body posture during the training with the
ergometer bike. The 3 independent articulated joints (A, B, C) allow to freely adjust the dashboard (4.1) with
the racing handle (7) and the triathlon add-on (7b) to the required position. You can thus continuously adjust
the angle of the dashboard to the viewing angle, as well as its height relative to the pedal's centre (central point
of the bike geometry), and its horizontal distance from the same pedal centre or the saddle. The
ergo_bike
8008 TRS
can then be individually adjusted to fit the body height of the users and to their training
habits (straight seating or leaning down as in racing position), or to reproduce the geometrical
properties of any “outdoor” training device (e.g. racing bike or mountain bike).
adapting
the height
of the
saddle
adapting
the height
of the
saddle
8.
8.
1
Joint C
Joint A
Joint B
Joint C
Joint A
Joint B
highest position
lowest position
Assembly
Summary of Contents for 8008 TRS
Page 1: ...8008 TRS ...