![background image](http://html1.mh-extra.com/html/daum-electronic/8008-trs/8008-trs_user-manual_514128101.webp)
T 1
T 1
Special Accessories
Technical Information
Special Accessory
Cardio Sensor chest band
What is in the box of a Cardio Sensor chest band
1 Skin-friendly Cardio Sensor chest band with integrated pulse sensor and transmitter
1 Adjustable elastic band to attach it to your chest
The
Cardio sensor chest band
measures your
pulse rate directly above the heart and transmits
the data directly to the integrated wireless cardio pulse
receiver. The location of the
chest band and transmitter directly above the heart
enables very accurate pulse rate measurement.
The data is wirelessly transmitted to the computer
of the
ergo_bike.
Pulse rate measurement using the
Cardio Sensor
chest band
is particularly useful when exact values
are required. This can be the case if your physician
needs the data of your training sessions with the er-
gometer in the context of a treatment.
Putting on and using the Cardio Sensor chest band
1.
Remove your upper body clothing or pull your shirt up
to uncover the area of the heart. Your skin should be
slightly moist, but not wet. If your skin is too wet, dry it
with a towel, if it is too dry, moisten the inside (contact
surface) of the chest band slightly.
3.
4.
Hold the Cardio sensor chest band over your chest.
5.
Pull the elastic band around your back and fasten the other toggle into the opening on the other side of the sensor band.
6.
There is a buckle on the elastic band, enabling you to adjust it. To obtain a comfortable fit, hold the buckle firmly and pull out
a section of the band.
Adjust the pulse sensor band so that the thicker part of the band, which contains the sensor and transmitter, lies on the chest
directly above your heart.
2.
The sensor chest band with the transmitter in
the middle has surface recesses at both ends.
The elastic band is fitted with round locking
toggles at both ends. Insert one of the toggles
through one of the square holes in the sensor band. Turn the toggle 90 and press it firmly into the recess.
Cardio
Sensor
chest band
(with transmitter)
integrated
Cardio pulse
rate receiver
All
ergo_bike
ergometers are equipped with a
built-in Cardio pulse rate receiver
, not visible from the outside.
This allows receiving of the pulse rate transmitted by any standard chest band, of the coded and non coded type.
You only need a
cardio sensor chest band
to achieve wireless heart pulse rate measurement.
Warning: using two chest bands simultaneously in the same room, either of the coded or non-coded type,
to achieve wireless heart rate measurement can lead to the display of a wrong pulse rate on the dashboard
of the
ergo_bike
.
The chest band is available from daum electronic gmbh;Order no. 90 91 015.
The button type battery should be replaced when you note a loss of battery power.
Simply remove the battery cover using a coin and replace the battery with an
equivalent new one.
Wireless Cardio Sensor Chest Band
Order no. 90 91 015
Battery housing
Summary of Contents for 8008 TRS
Page 1: ...8008 TRS ...