manualshive.com logo in svg

Daum electronic 8008 TRS, User Manual

Share
Download
Daum electronic 8008 TRS User Manual Download Page 103

LGA

LandesgewerbeanstaltBayern

N ü r n b e r g

T 3

The device is suitable for therapeutic utilization at home 
(complies with Class  A  DIN EN 957-1/5 ).

Safety Requirements

Conformity

To The Technical Plant And Equipment Act

hereby declares that this product complies with the following provisions

regarding electromagnetic compatibility and electrical safety:

89 / 336 / EWG of May 3, 1989 including subsequent changes (Recommendation 
92 / 31 / EWG of April 28, 1992 and recommendation 93 /68 / EWG of  July 22, 1993)

73 / 23 / EWG of February 19, 1973 including subsequent changes (Recommendation 
93 / 68 / EWG of August 30, 1993 )

EN 55081-1 ( EMC, Generic Emission Standard; Part 1: Residential 
commercial and light industry )

Technical safety recommendation:

Compare the supply voltage on the nameplate on the housing  with your local supply voltage 
prior to plugging the power cord to the power supply. Contact you dealer If the values are 
not the same.

The device is completely disconnected from the power supply by pulling out the power cord, 
therefore it should always be plugged into an easily accessible socket.

Area of application:

It does not meet the requirements of medical diagnostic applications (clinical use).

The maximum allowed load capacity is 

120 kg !

Technical Information

Summary of Contents for 8008 TRS















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands