Chapter 2 Operation Instruction
No.
Display
Name
Description
Reference Section
4
Auto
color-changing
manual start
If you set machine to
auto-color-changing, you should first
set needle color-changing order
(
press
the key
in the main screen
)
.
During embroidery, no matter where
the current needle locates, system will
act color-changing according to this
order. When you meet color-changing
code, machine will stop automatically
and change to the needle position that
already has been set. If you set auto
start, machine will start automatically;
if you set to manual start, pull bar to
start.
Auto
color-changing
auto start
Change design
direction
Press this key to shift the design
direction.
Design border
operation
Press this key to enter design border
operation window
Section 7.2
Positioning idling
In embroidery confirmation status, press
this key to do the operations of
positioning idling.
Section 7.3
Other assistant
management
Press this key to enter other assistant
management interfaces, like clock
setting and help.
Section 6.2
Special embroidery
mode
Press this key to enter interface for
manually shifting special embroidery.
Set color changing
order
When main shaft stops at 100°
,
press this key; after that, system goes to
the color-changing order menu, press
relative number to act color-changing.
Set the color-change order. Then the
machine will change color according to
the corresponding stitch number.
Section 7.1
5
Color changing and
current stitch
position
6
Machine status
information
(In the order of left
to right, top to
bottom)
Frame moving speed(use
to
shift between low speed
and high
speed
)
BECS-D16 computerized embroidery machine owner’s manual
13
Summary of Contents for BECS-D16
Page 2: ......