DAHAO BECS-D16, Owner'S Manual, Page: 97 / 222

Chapter 6 Assistant Operation
3. Press “ ”to confirm operation, system lets needle go down to hold the
cloth. Press “ ”to cancel the operation.
4. Release the cloth, move frame and confirm the operation.
After releasing the cloth, user needs move frame to desired position and press
“ ”to confirm. If you press“ ”, the operation will be cancelled.
5. Back to main screen after confirmation of frame-moving
Customers can hold tight the cloth and operate main shaft to go to 100°, then pull
bar to continue embroidering.
6.1.5 Setting another start
The offset point can be set at any point other than the start point. After setting it
and starting embroidery, the frame will firstly move from the offset position to the
start position automatically, and then the machine will start normal embroidery.
After embroidery, the frame will move back to the offset point. Moreover the
offset point is also the reference for the frame to move out when applique. This
function can only be used under the embroidery confirmation status and before
embroidery.
1. Follow the above instruction and enter assistant embroidery operation screen.
BECS-D16 computerized embroidery machine owner’s manual 91