DAHAO BECS-D16, Owner'S Manual

Page: 147 / 222

Chapter 10 JF type sequin embroidery
d) Press or till you see “Over” in “input sequin mode”, then press
“ ”to confirm.
For example: a machine with needle 9 as its end needle (sequins 3, 5, 7mm); first
needle is single sequin (9mm). The requirement is sewing a 7mm sequin at first,
then a 3 & 5mm overlapped sequin, then a 5 and 7mm alternative embroidery, then
9ps of 3mm sequin, 8ps of 5mm sequin, 4ps of 7mm sequin, 6ps of 3mm & 7mm
overlapped sequins. At last, use first needle to embroider a 9mm sequins.
Settings:
（
1
）
①
press 9
，
it will show sequin delivery mode screen
；
②
Use or till you see “C” in “input sequin mode”, then press
“ ”to confirm
；
③ p
ress“1”
，
then press “ ”to confirm
；
④
You should use or till you see “Over” in “input sequin
mode”, then press “ ”to end the first setting.
（
2
）
①
press 9
，
it will show sequin delivery mode screen
；
②
Use or till you see “AB” in “input sequin mode”, then
press “ ”to confirm
；
③
press“1”
，
then press “ ”to confirm
；
④
You should use or till you see “Over” in “input sequin
mode”, then press “ ”to end setting
。
BECS-D16 computerized embroidery machine owner’s manual 141