Appendix
Ⅳ
Make Special Multi-Sequin Design
Appendix
Ⅳ
Make Special Multi-Sequin Design
1
、
Dahao special multi-sequin design principle
The normal design making system identifies a sequin code as a jump stitch, but
it can not distinguish sequin combinations in one stitch position. For instance, it
can not recognize it’s a sequin A or B at one stitch position. Dahao special
multi-sequin design-making principle is to add a few jump stitch codes after the
original sequin code
（
jump stitch or stitch length is less than 0.1mm
）
to indicate
sequin combination, thus achieve the embroidery of overlapped sequin on one
stitch position. For instance, “A+C” means overlap sequin of A and C.
Rules are as followed:
The value of sequin A is 1
，
we use 1 sequin code.
The value of sequin B is 2
，
we use 1 sequin code plus 1 jump stitch.
The value of sequin A+B is 3
，
we use 1 sequin code plus 2 jump stitches.
The value of sequin C is 4
，
we use 1 sequin code plus 3 jump stitches.
The value of sequin A+C is 5
，
we use 1 sequin code plus 4 jump stitches.
The value of sequin B+C is 6
，
we use 1 sequin code plus 5 jump stitches.
The value of sequin A+B+C is 7
，
we use 1 sequin code plus 6 jump
stitches.
The value of sequin D is 8
，
we use 1 sequin code plus 7 jump stitches.
The value of sequin A+D is 9
，
we use 1 sequin code plus 8 jump stitches.
The value of sequin B+D is 10
，
we use 1 sequin code plus 9 jump stitches.
198 BECS- D16 computerized embroidery machine owner’s manual
Summary of Contents for BECS-D16
Page 2: ......