DAHAO BECS-D16, Owner'S Manual, Page: 188 / 222

Appendix
Ⅰ
Parameter Setting List
C49 X Backlash
Correction 0.0mm 0.0
～
1.0mm
C50 Y Backlash
Correction 0.0mm 0.0
～
1.0mm
B03 Over frame
by Step No No, Yes
D13 Speed When
Over frame 16 0,1,2…30
C15 High
Frame-Shift
Speed 16 1~30
C16 Low
Frame-Shift
Speed 15 1~30
D19 (AFC) Use No No, Yes
D20 (AFC)
Interval Time 3 0~15
C72 Machine
Embroidery
Mode hat Plain, hat, Clothes
C73 Frame
Weight 1 0~20
Main shaft Parameter
C07 Max. Speed 700-850 250
，
300
，
350
，…
,850
C09 Minimum
Speed 400 250,300,350…600
C08 Shift Stitch
Length
（
mm
）
5.0(All-servo
high-speed
machine) 1.0~10.0(common type
machine),3.0~6.0(All-servo
high-speed machine)
When the stitch length is
longer than the set value, the
machine will lower the
speed.
C10 Jump Stitch
Speed 500 400~750(common type
machine),400~1100(All-servo
high-speed machine) Set the rotation speed for
jump stitch.
C13 Set Run
Speed 80 80,90…150
C12 Startup
Stitches 1stitch 1 stitch ~9 stitch Set the number of slow
stitch before acceleration.
D02 Startup Acce. 12 1,2,3…30
Increase the value to bring a
quicker speedup after pulling
the bar.
C25 Set Break
Para. 0 0~30
Range: 0~30. When the
main shaft motor is an
electromagnetic motor, the
value is usually set as 9.
When it is a servomotor, the
parameter is usually set as
5-7.
182 BECS- D16 computerized embroidery machine owner’s manual