DAHAO BECS-D16, Owner'S Manual, Page: 115 / 222

Chapter 7 Other Operation
2. Press the key to shift stitch (flat or jump). Press the manual
frame moving key to let the frame go along the border. Press at each
turning point.
3. After edition, you need press and“ ”, then system will ask for new
design number and name.
4. You can input and press “ ”.
5. Press the key “ ”to give up current operation and return.
7.2.5 Embroider a “+” in current position
System will embroider a “+” at the current position, the size can be adjusted.
1. In design border operation, you can move the cursor to “Embroider a ‘+’ in
current position” and press “ ”. The system will enter the following screen:
You can set the length of + in both X and Y directions:
2.
After setting the length of “+” in both X and Y directions, press “ ”
,
System will generate a temporary data of the “+” and return to the main screen.
Now the label is displayed. You can pull bar to embroider a cross. After the
embroidery, the system will return to the embroidery preparation status
BECS-D16 computerized embroidery machine owner’s manual 109