Chapter 11
Operation of Cording Embroidery
threading point and the direction of the mechanical origin of cording device at last
needle position. Angle = Parameter value *0.9. For example, if the parameter value is
30, the angle will be 30*0.9=27°.
11.
Cording Device Movement Detection: detect whether the device moves to the proper
position. At present, this parameter is set as
“
N
”
.
12.
Test Thread-sending Motor of Cording Device (Y/N): “Y” (Default Value), which
means that the thread-sending motor will not rotate until the position of hall
component is checked. If it is set as “N”, the thread-sending motor will run as long as
the system is at embroidery status, regardless the position of the hall component.
11-5
Relative Operations of Cording Embroidery
11.5.1
Shift between Flat Embroidery Position and Cording Embroidery Position
1.
Manual Shift
In the main interface, press the key
to enter into color-changing
interface.
Move the cursor to the icon of applicable special embroidery type and press
the key
to save the selected type. Press the key
to exit.
Definition of Icons:
Normal Embroidery
；
Z4 Embroidery: The rod swings once at each stitch.
148 BECS- D16 computerized embroidery machine owner’s manual
Summary of Contents for BECS-D16
Page 2: ......
