DAHAO BECS-D16, Owner'S Manual

Page: 187 / 222

Appendix
Ⅰ
Parameter Setting List
B07 Pull bar after
T. B. No No, Yes
B08 T. B. Back
Sti. 0 stitch 0 stitch ~7 stitch It is unavailable to some
machine types.(in sequin,
this parameter will not be
performed)
B09 Patch Count 1 stitch 1 stitch ~9 stitch How many stitches to patch
before the thread break
point
B10 Speed Down
After Patch Stop No Change, Down, Stop
B14 To Set All
Heads Patch No No, Yes If “Yes”, all unclosed heads
do patching when patching.
C90 T. B. Device
Type spring spring
，
wheel
，
Winding thread wheel
C27 Detect T. B.
Mode spring spring
，
wheel
C28 STI. For
Filter T.B. 3 stitch 1 stitch ~6 stitch
C67 Sensitivity of
Upper Thread 6 1~15
C68 Sensitivity of
Under Thread 6 1~15
C69 Filter Sti. For
Upper Thread 6 Sti 1~6 Sti.
C70 Filter Sti. For
Under Thread 6 Sti 1~10 Sti.
C91 0 0
～
10
Frame Parameter
C06 Frame Curve F1 F1~F6 The high-speed servo
machine doesn’t have this
parameter.
C74 X direction
Frame Angle
A 245 230~280 It is fit for high-speed
machine using Dahao
servo-motor driver.
C75 X direction
Frame Angle
B 245 230~280 The same as above.
C76 Y direction
Frame Angle
A 245 230~280 The same as above.
C85 Y direction
Frame Angle
B 245 230~280 The same as above.
BECS-D16 computerized embroidery machine owner’s manual 181