DAHAO BECS-D16, Owner'S Manual, Page: 213 / 222

Appendix
Ⅳ
Make Special Multi-Sequin Design
other design data base uses 3MM, 6.75MM and 9MM, the design data base
should contain 3MM-A base, 6.75MM-B base, 6.75MM-AB base, 9-C base,
9-AC base, 9-BC base and 9-ABC base.
Other sequin design data bases are formed in the same principle.
The alternative sequin design data base should combine single and
overlap sequins. For instance, 3MM-A sequin base and 4MM-AB sequin
base can form alternate sequin of 3MM-A & 4MM-AB, which achieves
embroidery effect of A, AB, A, AB…
7
、
Turn normal sequin design to Dahao special sequin design
According to the above rules, we just need insert some jump stitch after
“sequin code” , so that we can change the original sequin code to
“multi-sequin code”.
1) If you want to change the first sequin code to A+B sequin code, you
need to locate to that stitch first
（
its character is to put down the
sequin
）
.
2) Right click “insert jump stitch” twice to insert two jump stitches after
the original sequin code.
BECS-D16 computerized embroidery machine owner’s manual 207