Chapter 11
Operation of Cording Embroidery
Sepcil
embroidery needle
Sepcil
embroidery mode
During the embroidery, when the special embroidery head finishes the work,
the machine will stop at the end point. At this moment, the system will display
“embroidery pause, pull bar to continue” and wait for the operation of the string.
After that, user need pull bar to continue. Then, the machine will automatically
shift to the flat embroidery head and work according to its functions. In a similar
way, when user shifts from flat embroidery head to special embroidery head, the
machine will stop automatically and wait for the preparation of string after needle
position 1 (special embroidery head) is shifted. Then user can pull the bar to
continue the embroidery.
11.5.2
M
Axis
Operation of Cording Embroidery
The operations of M axis contain “M axis to cycle” and “M axis to turn”,
both of which are within the Assistant Functions. In the main interface, click the
key
to enter the “Assistant Operation” interface. Turn the page until you
find the parameters of “M axis to cycle” and “M axis to turn”.
150 BECS- D16 computerized embroidery machine owner’s manual
Summary of Contents for BECS-D16
Page 2: ......