Chapter 10 JF type sequin embroidery
B.
Features and Functions:
1.
Two ways for sending sequin: Roller Type and Lever Type;
Roller: the core part in the whole mechanism is a wheel-like device. Its operating
principle is to rotate continuously towards in one direction so as to send sequins
into position.
Lever: the core part is staff linkage. Its operating principle is to use the retrieval
movement of the linkage to send the sequins into position.
2.
Separate action of sequin mending and sequin feeding mechanism
3.
Manual separate or collective sequin-feeding at one time
4.
Separate display of sequin working status
5.
Type of sequin feeding and angle can be changed via control panel.
C.
Specifications
1.
Sequin diameter range: 3mm,4mm,5mm,6.75mm and 9mm;
2.
The maximum speed for sequin embroidery is 850 rpm.
D.
A/B/C/D means four sequin-feeding equipments. If four sequins are delivered
in the same time, A will be on the top, then B, C and D.
10-2
Embroider sequin
You may follow the steps in sequin embroidery:
1.
Input design with sequin code (see 10.3)
2.
If you want, you can select and edit design (see 10.4)
3.
Set sequin parameters according o the instruction (see 10.5)
4.
Check and adjust the sequin delivery device (10.8) and ensure the
sequin-feeding device is in normal status.
128 BECS- D16 computerized embroidery machine owner’s manual
Summary of Contents for BECS-D16
Page 2: ......
