DAHAO BECS-D16, Owner'S Manual

Page: 21 / 222

Chapter 2 Operation Instruction
2-5 How to Input Numerals, Letters and Symbols
For some menu, press the key “ ”to enter setting interface (optional), press
“ ” to shift options, press “ ”to confirm.
At inputting number, you can press “ ” to enter radix point, press “ ” to enter
negative number. if there are several digits or letters on one key, you can press the
key continuously until you get the number or letter you want. For example, press
trice, then you can get “I”. “ ” is used for shifting capital letters and
small letters. “ ” is used for deleting the last letter you typed in.
2-6 Moving of the cursor
The cursor of this computer is displayed as “ ”. You can press “
” or relative digit number to move the cursor to the option. Press “ ” or
“ ” for a while, the cursor will move consecutively among each option.
2-7 Procedure of Embroidery
The machine embroiders based on the designs in its memory. The following is the
basic Procedure of Embroidery.
BECS-D16 computerized embroidery machine owner’s manual 15