DAHAO BECS-D16, Owner'S Manual, Page: 91 / 222

Chapter 5 Management of Machine Parameters
4
、
"Success to read all parameters " will appear.
After the above operations, the system parameters will resume to the status
before user updates the software. The embroidery machine can be used now.
5-8 Adjust Parameters of X
＆
Y Servo Drivers
The type parameters are used for the machine, whose main shaft uses Dahao
servo motor and driver. Only the factory can rework these parameters. Due to the
password-protected function, you must input the factory password, if adjusting the
parameters or performing the corresponding operation to the machine. The
operation process is as followed:
1
、
Press in the main screen.
2
、
The screen go into
“
Machine Parameters Operation
”
interface. Move cursor
to “Adj Parameters of X
＆
Y Servo Drivers” and press “ ”to “Parameters
of X
＆
Y Servo Drivers” window.
BECS-D16 computerized embroidery machine owner’s manual 85