DAHAO BECS-D16, Owner'S Manual

Page: 202 / 222

Appendix
Ⅲ
Error Information
No. Mistakes
32 File not in disk
33 Not a file
34 File corrupt
35 disk write protect
36 Invalid directory
37 File existed!
38 Directory is full in memory.
39 Not enough space
40 Not open media
41 Error design data
42 Invalid design type
43 Not normal design
44 Not combined design
45 Please wait design operation
46 Cannot delete emb. design
47 Stitch number too large
48
Design stitches is over
49 Error design, or communication fail
51 Read Design Error
52 Edit Forbid when Emb. Ready
53 Design is too big. Can't process.
54 Can not format the disk!
55 Unsupport operation!
56 Disk Error
Lower monitor mistakes
EC05 THE HOOK IS NOT OK
EC07 HOOKING TIME IS OUT
EC08 NOT SET (E. SET)
EC09 CANNOT RETURN
EC10 CANNOT RETURN
EC11 DESIGN NOT EXIST
EC12 STOP POSITION ERR
EC13 FRAME OVER LIMIT
EC14 CONTROL MEMORY LOST
EC16 STEP MOTOR ERR
EC17
CHANGE CLR OVERTIME
EC18 HALF RETURN ERR
EC19 NEEDLE POSTION ERR
EC20 MAIN MOTOR OVERTIME
EC21 CHANGE CLR OVERLIMIT
EC22 MAIN MOTOR REVERSE
EC23 CANNOT EMBROIDER
196 BECS- D16 computerized embroidery machine owner’s manual