DAHAO BECS-D16, Owner'S Manual, Page: 144 / 222

Chapter 10 JF type sequin embroidery
Move the cursor to this parameter and press “ ”to enter. Use or to
modify the feeding mode and press “ ”to confirm it. Then the system will
automatically enter the screen for changing the sequin-feeding angle, where user
can change value with the or
.
(15) A/B/C/D size&color of R/L sequin
This parameter should be set according to the actual mechanical structure. The
order from A to D is from front to back.
Move the cursor to this parameter and press “ ”to enter it. Use or
to modify the size of sequin at that position and press “ ”to confirm it. Then
the system will automatically enter the screen for setting the color. Please use
or to change the color and press to finish the setting.
Note: “Motor Number of R (L) Sequin” is closely related to the number of
“A/B/C/D” in parameter “A/B/C/D size&color of R/L sequin”. For example, if
“Motor Number of R (L) Sequin” is set to 2, then it only displays “A/B size&color
of R/L sequin”.
(16) Sequin Gap Num of R(L) Sequin
This is to set gap valve number. If there is no gap, then it should be set to 0.
Move the cursor to this parameter and press “ ”to enter. Use or to
modify the value and press “ ”to confirm.
(17) L/R Sequin Pitch Valve Action Time.
This parameter is used to change the waiting time of the adjustment on action of
interval valve. The larger the value is, the waiting time will be longer; the smaller
138 BECS- D16 computerized embroidery machine owner’s manual