Chapter 5 Management of Machine Parameters
5.4.5
Unlock the factory password
The procedure is similar to chapter 5.4.2.
5.4.6
Factory Save/Reset Parameters
The procedure is similar to chapter 5.4.3.
5-5
Initialize Parameters
This function can initialize the general embroidery parameters of the machine.
The system saves a group of default parameter values. The factory and
embroidery factory administrator can save their parameter settings. In this
operation it follows the rules at below:
1.
When the factory password and embroidery factory administrator password
are not set or the machine has no password-protected function, all general
embroidery parameters are initialized to their default values.
2.
When that factory password has been set and unlocked, all general embroidery
parameters are initialized to their default values.
3.
When that factory password has been set and unlocked and administrator
password has not been set or has been canceled, all factory-authorized machine
parameters are recovered to factory saved values and other parameters are
initialized to the default values.
4.
When that factory password has been set and unlocked and administrator
password has been set and unlocked, all factory-authorized machine parameters
are recovered to factory saved values and administrator authorized machine
application parameters are recovered to administrator saved values and other
parameters are initialized to their default values.
BECS-D16 computerized embroidery machine owner’s manual
81
Summary of Contents for BECS-D16
Page 2: ......