DAHAO BECS-D16, Owner'S Manual, Page: 28 / 222

Chapter 2 Operation Instruction
9
）
Let Needle Down (The Needle Stops at the Designated Low Position)
This function is intended to quilt embroidering at replacing the fabric. Click
in the main screen and then the option “Let needles down”. When clicking “ ”,
the needle will prick into the embroidery cloth and a prompt will appear. After
releasing the cloth (cloth has to be separated from the frame), move the frame to
the designated position and click “ ”. After this operation, the needle is still
down. When the cloth is placed on the frame again, click to turn the main
shaft to 100º manually.
10
）
Manual Operations of Automatic Frame Changer (AFC), Sequin and
Special Embroidery
This function is functional for the machines that are equipped with devices for
AFC, sequin and special embroidery. For such machines, click and then
select this option to enter the concerned menu. Click the corresponding keys
according to the prompts.
G. Embroidery Release
When the machine stops, click . Choose “ ”in the followed prompt and
(embroidery confirmation) will change into (embroidery release).
2-8 Normal Embroidery, Returning and mending
In embroidery confirmation status (the icon appears), push the switch of
machine head (that needs perform normal embroidery) to the normal embroidery
mode, and push the switch of machine head that needn’t embroider to the
mending mode, and then pull the operation bar to right and release it to let the
22 BECS- D16 computerized embroidery machine owner’s manual