DAHAO BECS-D16, Owner'S Manual, Page: 165 / 222

Chapter 12
Directions on Coiling, Taping and Zigzag Embroidery
1. M axis to be ready
Press the key and click “ ” to activate the window. Then click “ ” on
the dialogue window to let the M axis back to the working position. Click “ ”
to exit.
2. M axis to cycle
Press the key and click “ ” to activate the window. Then click “ ” on
the dialogue window to let the M axis rotate to the “zero point”, click “ ”to
exit.
3. M axis to turn
Press the key and move icon to “M Manual”, then click “ ” to activate
the dialogue window. Move icon to “M axis Left” to let the M axis rotate to the
left. It will rotate 18° left once you click the button. After 20 times click, it will
return to its origin; while moving icon to “M axis Right” and clicking “ ”on
the dialogue window will let the M axis rotate to the right. It will rotate 18° right
once you click the button as well. After 20 times click, it will return to its origin;
click “ ”to exit.
12.4.3 Operations of Clamp Foot
In the main screen, click to enter into the “Assistant Embroidery Operation”
screen, and move cursor to
“
Nipple up
”
,then press “ ”to activate the operation
window. Click “ ” to lift the clamp foot, select “ ”to exit.
Press the key and select
“
Nipple down
”
and “ ”to activate the operation
window. Click “ ” to lower the clamp foot, select “ ”to exit.
BECS-D16 computerized embroidery machine owner’s manual 159