xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
658
Chapter 59
Mirror Commands
create mirror group_id
<value 1-4>
config mirror port
<port> {[add | delete] source ports <portlist> [rx | tx | both]}
config mirror group_id
<value 1-4> {target_port <port> | [add | delete] source ports <portlist> [rx |
tx | both] | state [enable | disable]}(1)
delete mirror group_id
<value 1-4>
enable mirror
disable mirror
show mirror
{group_id <value 1-4>}
59-1
create mirror group_id
Description
This command used to create a mirror group. If the mirror group has existed, do nothing and return
success.
Format
create mirror group_id <value 1-4>
Parameters
<value 1-4>
- Enter the mirror group ID used here. This value must be between 1 and 4.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
Create mirror group 3:
DGS-3620-28SC:admin# create mirror group_id 3
Command: create mirror group_id 3
Success.
DGS-3620-28SC:admin#
59-2
config mirror port
Description
This command is used to allow a range of ports to have all of their traffic also sent to a designated
port − where a network sniffer or other device can monitor the network traffic. In addition, you can
specify that only traffic received by, sent by or both is mirrored to the target port.
