xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
280
Parameters
neighbor_state_change
- The state of the OSPF neighbor state change debug.
interface_state_change
- The state of the OSPF interface state change debug.
dr_bdr_selection
- (Optional) Used to include or exclude debug information for DR/BDR
selection.
lsa
- The state of the designated debug flag.
all
- (Optional) Specifies to set all LSA debug flags.
originating
- (Optional) Specifies to set LSA originating debug flag.
installing
- (Optional) Specifies to set LSA installing debug flag.
receiving
- (Optional) Specifies to set LSA receiving debug flag.
flooding
- (Optional) Specifies to set LSA flooding debug flag.
packet
- The state of the designated debug flag.
all
- (Optional) Specifies to set all packet debug flags.
receiving
- (Optional) Specifies to set packet receiving debug flag.
sending
- (Optional) Specifies to set packet sending debug flag.
retransmission
- The state of the OSPF retransmission debug flag.
spf
- The state of the designated debug flag.
all
- (Optional) Specifies to set all SPF debug flags.
intra
- (Optional) Specifies to set intra-area SPF debug flag.
inter
- (Optional) Specifies to set inter-area SPF debug flag.
extern
- (Optional) Specifies to set AS external SPF debug flag.
timer
- The state of the OSPF timer debug flag.
virtual_link
- The state of the OSPF virtual link debug flag.
route
- The state of OSPF route debug flag.
redistribution
- The state of OSPF redistribution debug flag.
state
- Specifies to set the OSPF debug flags state.
enable
- Specifies that the OSPF debug flags state will be enabled.
disable
- Specifies that the OSPF debug flags state will be disabled.
Restrictions
Only Administrator level users can issue this command.
Example
To enable OSPF neighbor state change debug:
DGS-3620-28SC:admin# debug ospf neighbor_state_change state enable
Command: debug ospf neighbor_state_change state enable
Success.
DGS-3620-28SC:admin#
To enable OSPF interface state change debug:
DGS-3620-28SC:admin# debug ospf interface_state_change state enable
Command: debug ospf interface_state_change state enable
Success.
DGS-3620-28SC:admin#
To enable all OSPF LSA debug flags: