xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
594
drop
- The new group will be dropped.
replace
- The new group will replace the oldest group in the register table.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure the maximum number of multicast groups that ports 1 and 3 can join to 100:
DGS-3620-28SC:admin# config max_mcast_group ports 1, 3 max_group 100
Command: config max_mcast_group ports 1, 3 max_group 100
Success.
DGS-3620-28SC:admin#
51-9
show max_mcast_group
Description
This command is used to display the maximum number of multicast groups that a port or VLAN
can join. If the IPv4 or IPv6 option is not specified, IPv4 is implied.
Format
show max_mcast_group [ports <portlist> | vlanid <vlanid_list>] {[ipv4 | ipv6]}
Parameters
ports
- Specify a range of ports to display the maximum number of multicast groups.
<portlist>
- Specify a range of ports to be displayed.
vlanid
- Specify the VLAN ID for displaying the maximum number of multicast groups.
<vlanid_list>
- Enter the VLAN ID of the VLAN here.
ipv4
- (Optional) Specify to display the maximum number of IPv4 learned addresses.
ipv6
- (Optional) Specify to display the maximum number of IPv6 learned addresses.
Restrictions
None.
Example
To display the maximum number of multicast groups for ports 1-2:
