xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
126
Chapter 7
ARP Commands
create arpentry
<ipaddr> <macaddr>
delete arpentry
[<ipaddr> | all]
config arpentry
<ipaddr> <macaddr>
config arp_aging time
<min 0-65535>
show arpentry
{ipif <ipif_name 12> | ipaddress <ipaddr> | static | mac_address <macaddr>}
clear arptable
show ipfdb
{[ip_address <ipaddr> | interface <ipif_name 12> | port <port>]}
7-1
create arpentry
Description
This command is used to enter an IP address and the corresponding MAC address into the
switch’s ARP table.
Format
create arpentry <ipaddr> <macaddr>
Parameters
<ipaddr>
- The IP address of the end node or station.
<macaddr>
- The MAC address corresponding to the IP address above.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To create a static ARP entry for the IP address 10.48.74.121 and MAC address 00:50:BA:00:07:36:
DGS-3620-28SC:admin#create arpentry 10.48.74.121 00-50-BA-00-07-36
Command: create arpentry 10.48.74.121 00-50-BA-00-07-36
Success.
DGS-3620-28SC:admin#
7-2
delete arpentry
Description
This command is used to delete a static ARP entry, made using the
create arpentry
command
above, by specifying either the IP address of the entry or all. Specifying
all
deletes the switch’s
ARP table.
