xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
275
all
-
Display all port’s counters.
If no parameter is specified, display the global counters.
Restrictions
Only Administrator level users can issue this command.
Example
To show the STP counters for port 9:
DGS-3620-28SC:admin# debug stp show counter ports 9
Command: debug stp show counter ports 9
STP Counters
--------------------------------------
Port 9 :
Receive:
Transmit:
Total STP Packets
:32
Total STP Packets
:32
Configuration BPDU
:0
Configuration BPDU :0
TCN BPDU
:0 TCN BPDU :0
RSTP TC-Flag
:15
RSTP TC-Flag :7
RST BPDU
:32
RST BPDU
:32
Discard:
Total Discarded BPDU :0
Global STP Disabled
:0
Port STP Disabled
:0
Invalid Packet Format
:0
Invalid Protocol
:0
Configuration BPDU Length :0
TCN BPDU Length
:0
RST BPDU Length
:0
Invalid Type
:0
Invalid Timers
:0
DGS-3620-28SC:admin#
20-12
debug stp show flag
Description
This command used to display the STP debug level on specified ports.
Format
debug stp show flag {ports <portlist>}
Parameters
ports
- (Optional) Specifies the STP ports to display.
<portlist>
- (Optional) Enter the list of port used for this configuration here.
