xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
580
Chapter 49
LACP Configuration
Commands
config lacp_port
<portlist> mode [active | passive]
show lacp_port
{<portlist>}
49-1
config lacp_port
Description
This command is used to configure per-port LACP mode.
Format
config lacp_port <portlist> mode [active | passive]
Parameters
<portlist>
- Specify a range of ports to be configured.
mode
– Specify the port mode.
active
- Specify the mode as active.
passive
- Specify the mode as passive.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure port LACP mode for ports 1 to 3:
DGS-3620-28SC:admin#config lacp_port 1-3 mode active
Command: config lacp_port 1-3 mode active
Success.
DGS-3620-28SC:admin#
49-2
show lacp_port
Description
This command is used to display per-port LACP mode.
Format
show lacp_port {<portlist>}
